![]() ![]() You can use sketch text to place different types of symbols, company names, position marking, and more on your model. The final method you could use is a custom appearance with the text included, but you will have to be careful how you place it on the model and it will not show up on any drawings containing the part (unless you use shaded views) and cannot be dimensioned. Sketched texts are reference features and are used mainly for visual purposes. However, be aware that this does create a feature on the part.ģ. You would then be able to color the individual surfaces any color you want. You will need to watch out for what your model's resolution is as this can cause problems if the feature is too small. Create your text on your part as a sketch and then either make it a small protrusion or small cut. The down side, you can only use one color for the text and it can cause a slower regeneration on rotation and in drawings.Ģ. If you lower the spacing on the hatching enough, it looks like a fill. Create the text as a sketch, then fill the sketch with hatching. by just hitting OK or can place it flat to screen and make a separate layer to control display of only feature notes instead of showing all or no annotations.There are several ways you could go about coloring text. This is the method to get what you want however it is not necessary to Attach it to geometry, you can leave the Note unplaced. Go into your tree filters (which control what shows in the tree) and add notes. You cannot add or edit the comment while editing the sketch but after you hit the Check button to finish the sketch you can go back and add notes. Right Click the Feature in your Model Tree You can add Notes to a Feature as a comment or Add text within the sketch and make it construction geometry but the latter is a way messier method and Construction cannot be set to the Text so scratch that method. RE: Any way to add notes or comments in Sketcher? mjcole (Mechanical) 15 Dec 12 21:03 Internet searching has not been too helpful, as these two keywords are quite exceedingly common, and there is of course no way of telling a search engine, "No, I don't mean 'comment,' I mean ' comment.'" :) Using Extended ASCII characters Creating Geometric Tolerances using text Creating a format with automatically updating model parameters Using the character. So just a "notes" or "comment" type of feature is what I'm digging for - or else some other way of adding in this kind of documentation. I see that there is an Annotate feature that can be added, but it is cumbersome, and it also appears on the main feature list, and it requires attachments to geometry that may change or disappear, etc etc.Īnd in Sketcher there is the Text tool, but it is inserted as real geometry that would then get extruded, revolved, swept, or whatever I'm doing. I don't know of anything at all similar in Pro-E, short of its feature-level dependencies. If I'm programming C, or doing something in a spreadsheet, I can either see dependency problems when the program attempts (and fails) to compile or run, or Excel will whack me on the forehead and tell me I'm trying to do something stupid. Whatever the reason was though, it isn't documented. Maybe I just wanted to quick drag some geometry around to see what it would look like elsewhere. That still won't explain why it was locked. And I can also accidentally click something without noticing, though that's rare. Then a day later I remember why it was 0.540, and have to backtrack a bit to get that original feature back. So then it gets shifted to make room for something else. So, I'll put a feature in that needs to be sized so the extrusion will accommodate a drill bit during assembly, but then a day later I won't remember why that dimension needs to be 0.540", or that I wanted to put a tolerance of +0.010/-0.006 on it when the drawing is generated. (Or after 15 minutes, when someone comes in with a technical issue, or a customer support call, or any of the myriad of other interruptions throughout a typical day.) Problem is, I might remember the reason for a dimension one day, but then forget the next day. ![]() Meet a weight requirement, stackability for storage, fitting a specific size of screw, mating with 3 other types of part, spaces for tooling, making sure it's all shiny and purdy for Marketing :), and so on. I do design of aluminum extrusions and sheet metal enclosures, and there are many features and dependencies built into even the smallest, simplest-looking things. What I'm after: Some way to add notes or comments in Sketcher, similar to how one would add comments in computer code to explain what a line or section should do.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |